About this item
- [Ultra Brightness] - Compared with SMD 2835:1 chip on board or 5050:3 chips on board, COB (Chip On Board) LED light has multiple chips on the same circuit board (PCB). There are total 4800 chips on the 10M(480LEDs/M) COB LED Strip Lights, bringing the emitting units unprecedentedly close together and producing a super even lighting output, more uniform lighting, no worries about dark spots!
- [Dimmable with RF Remote Control] - The 13 keys RF remote control allows to 360° control the strip light within 15m. 4 timer delay setting functions(60s/10m/30m/60m) satisfy you to set the ON and OFF time of the light strip well. Pre-set 3 level dimming function (25%, 50%, 100%) meets your brightness needs in different scenarios. The perfect memory function can keep the last setting when you turn on your light without having to set it repeatedly.
- [Lead-free Materials, Safer to Use] - Compared with lead-containing material COB LED strips that harm human health and polluted the environment, PAUTIX COB LED strips use new lead-free materials, more environmentally friendly and more durable than other COB LED strips. 24V low voltage no longer worry about electric shock, safer to use; low power consumption(10W/M), energy saving.
- [Durable and Widely Used] - Different from single-sided PCB, the true double-layer PCB is more resistant to compression and are not easily damaged or deformed. With strong double-sided adhesive tape, PAUTIX COB LED strip lights can be attached and installed reliably. 10m per roll with 20AWG 20cm extension cable and DC female plug, very suitable for decoration in kitchen, cabinet, bedroom, stairs, mirror, hallway, DIY backlight, table lamp, toy lamp and other places needed.
- [Packaging Scope & Warranty] - The package contains: 1 X 10m PAUTIX 24V 3000K Warm White COB LED strip light; 1 X 13 Keys RF remote/controller; 1 X DC24V 2A 48W power supply. PAUTIX provides 5-year worry-free warranty, please contact us in time if there is any problem with the product.
- [Warm Tips] - The exension wires at the end of the strip that is convenient for you to connect the DC connector included in the package so that you can power at both ends when you add longer strips in the kit can be cut if you don't need to connect more strips. The 48W power supply in the kit is just enough for the strip light in the kit use. You must replace it with a higher output 24V power supply if the total length of the strip light exceeds 10M.
›
.featureBulletsExpanderContent {
padding: 0;
}
.featureBulletsExpanderHeader {
padding-left: 0px !important;
outline: none !important;
}
.featureBulletsExpanderHeader .a-icon{
right: 4px !important;
}
Reviews
There are no reviews yet.